This is the procedure to view or change the Station Number:

    This is the keyboard:
	________________________
	|     |     |     |     |
	|     |     |     |     |
	|_____|_____|_____|_____|
	|     |     |     |     |
	| OOO |     |     |     |
	|_____|_____|_____|_____|
	|     |     |     |     |
	|     |     |  0  |     |
	|_____|_____|_____|_____|
	|     |     |     |     |
	|     |     |     |     |
	|_____|_____|_____|_____|

    a.  Press these two keys marked with 0's together, depressing
	the one marked 000 just slightly before the other one.

    b.  The top line of the display will show the Station Number
	Address that the Registration System thinks is assigned to
	this Station.  The number will be between 1 and 32.  (If it is
	32, then the station doesn't actually have an address, unless
	you know you have actually set this station's number to 32.
	That's because the factory sets an invalid station address
	when it makes the controller.  You can't do that.)

    c.	Rotate the hand encoder to adjust the Station Number.  For
	example, if you wanted to set up Station 5, and dial in 5 as
	the Station Number.

    d.  To make the Registration Sysem remember the new value, press
	the two keys marked with 0's together, depressing the one
	marked 000 just slightly before the other two:
	________________________
	|     |     |     |     |
	|     |     |     |     |
	|_____|_____|_____|_____|
	|     |     |     |     |
	| OOO |     |     |     |
	|_____|_____|_____|_____|
	|     |     |     |     |
	|     |     |  0  |     |
	|_____|_____|_____|_____|
	|     |     |     |     |
	|     |     |     |     |
	|_____|_____|_____|_____|

	Pressing any other key(s) will make the Registration Sysem
	forget about any changes you attempted to make.  This is the
	way you view (and verify) the current value without making a
	change.

    e.	It's good practice to check your work by repeating steps a and
    	d above, omitting changing any data.

-----------------------------------------------------------------------
Copyright 2009, Michael L. Riechers, all rights reserved, except that
permission is granted, and encouraged, to copy, in whole or in part,
for personal, organizational, informational, and educational use,
without limit, and to post individual paper copies wherever, such as
on Presses, Bulletin Boards, and Bathroom Walls, so long as no charge
beyond a nominal reproduction fee is made, and this copyright notice
is retained.

As always, your questions, comments, corrections, blurbs, blogs and
rants are encouraged.  Please send them my way via email, web, or
telephone, mlr at rse.com or 513/844-2220.