This is the procedure to view or change the Machine Model Number:

    This is the keyboard:
	________________________
	|     |     |     |     |
	|     |     |     |     |
	|_____|_____|_____|_____|
	|     |     |     |     |
	|     |     |     |     |
	|_____|_____|_____|_____|
	|     |     |     |     |
	|     |     | 000 |  0  |
	|_____|_____|_____|_____|
	|     |     |     |     |
	|     |     |     |     |
	|_____|_____|_____|_____|

    a.  Press these two keys marked with 0's together, depressing
	the one marked 000 just slightly before the other one.

    b.  The top line of the display will show the Press Machine Model
	Number that the Registration System thinks that this _Press_
	is.  (If the controller is fresh from the factory, then the
	Press Model Number will most likely be 04 for a Mark IV press.
	That's why you have to change the Press Machine Model Number
	to the one assigned to your type Press:

	01  Commanders, Pro-glides, MSPs, etc.

	04  Mark IV Series Presses.

	14  Mark IV Series Presses of a certain type (doesn't make any
	    difference for Registration, actually).

	05  Mark III Series Presses.

    c.	Rotate the hand encoder to adjust the Press Machine Model
	Number.  (Only valid machine types will show up on the
	display, so, you can select a wrong Press Model, but you can't
	select an invalid one).  For example, if your Press is a
	Pro-Glide, dial in 1 as the Press Machine Model Number.

    d.  To make the Registration Sysem remember the new value, press
	the two keys marked with 0's together, depressing the one
	marked 000 just slightly before the other two:
	________________________
	|     |     |     |     |
	|     |     |     |     |
	|_____|_____|_____|_____|
	|     |     |     |     |
	|     |     |     |     |
	|_____|_____|_____|_____|
	|     |     |     |     |
	|     |     | 000 |  0  |
	|_____|_____|_____|_____|
	|     |     |     |     |
	|     |     |     |     |
	|_____|_____|_____|_____|

	Pressing any other key(s) will make the Registration Sysem
	forget about any changes you attempted to make.  This is the
	way you view (and verify) the current value without making a
	change.

    e.	It's good practice to check your work by repeating steps a and
	d above, omitting changing any data.

-----------------------------------------------------------------------
Copyright 2009, Michael L. Riechers, all rights reserved, except that
permission is granted, and encouraged, to copy, in whole or in part,
for personal, organizational, informational, and educational use,
without limit, and to post individual paper copies wherever, such as
on Presses, Bulletin Boards, and Bathroom Walls, so long as no charge
beyond a nominal reproduction fee is made, and this copyright notice
is retained.

As always, your questions, comments, corrections, blurbs, blogs and
rants are encouraged.  Please send them my way via email, web, or
telephone, mlr at rse.com or 513/844-2220.